Tire Pressure Warning Valve Removal

Suspension. Corolla. Zre142 Aze141
Tire Pressure Monitoring. Corolla. Zre142 Aze141

  1. REMOVE FRONT WHEEL

  2. REMOVE REAR WHEEL

  3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

Tire Pressure Warning Valve -- Removal



1. REMOVE FRONT WHEEL


2. REMOVE REAR WHEEL


3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

  1. Remove the cap and valve core to release the air from the tire.

    HINT:
    Keep the removed cap.

  1. After ensuring that a sufficient amount of air has been released, remove the nut and washer used to secure the tire pressure warning valve and transmitter. Drop the tire pressure warning valve and transmitter with the grommet into the tire.

    HINT:
    The grommet may remain attached to the rim.


    Corolla. Zre142 Aze141.Tire Pressure Monitoring.Tire Pressure Warning System.Tire Pressure Warning Valve Removal

  1. After dropping the tire pressure warning valve and transmitter into the tire, disengage the bead using the shoe of the tire remover.

    NOTICE:
    1. Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.
    2. Set the tire remover shoe as shown in the illustration.
      Width (A):
      10 to 20 mm (0.394 to 0.787 in.)

  1. Separate the upper bead.

  1. Take out the tire pressure warning valve and transmitter with the grommet from the tire and separate the lower bead.

  1. Remove the grommet from the tire pressure warning valve and transmitter.