Ecm Installation

Install the 2 ECM brackets onto the ECM with the 4 screws.

Torque:

8.8 N*m{90 kgf*cm, 78 in.*lbf}

Install the ECM with the 3 bolts.

Torque:

8.0 N*m{82 kgf*cm, 71 in.*lbf}

Connect the 2 ECM connectors.

1. Connect the 2 ECM connectors and lower the 2 levers.
   

   NOTICE:

   1. When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.
      
   2. Make sure that the 2 levers are securely locked.
      

Install the wire harness clamp.

Install the air cleaner case with the 3 bolts.

Torque:

7.0 N*m{71 kgf*cm, 62 in.*lbf}

Install the wire harness clamp to the air cleaner case.

Install the air cleaner filter element.

Install the air cleaner cap sub-assembly with hose with the 2 clamps.

Tighten the hose clamp to the specified torque.

Torque:

2.0 N*m{20 kgf*cm, 18 in.*lbf}

Connect the ventilation hose.

Connect the 2 wire harness clamps and mass air flow meter connector.

Connect the cable to the negative battery terminal.

Torque:

5.4 N*m{55 kgf*cm, 48 in.*lbf}