Front Seat Inner Belt Assembly -- Installation |
| 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY |
Install the front seat inner belt assembly with the nut.
- Torque:
- 41 N*m{420 kgf*cm, 30 ft.*lbf}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.
 |
Connect each connector and clamp.
| 2. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat) |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connectors under the seat.
Temporarily install the front seat assembly with the 4 bolts.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Tighten the 2 bolts on the front side of the seat.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
- HINT:
- Tighten the bolts in the order indicated in the illustration.
 |
Lift up the seat track adjusting handle and move the seat to the foremost position.
Tighten the 2 bolts on the rear side of the seat.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
- HINT:
- Tighten the bolts in the order indicated in the illustration.
 |
| 3. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (for Manual Seat) |
While sliding the front seat, check that the left and right adjusters move together smoothly and lock simultaneously.
If the seat adjusters do not lock simultaneously, loosen the bolts securing the seat to adjust the adjuster position.
| 4. INSTALL OUTER SEAT TRACK COVER (for Manual Seat) |
Engage the 2 claws and install the outer seat track cover.
 |
| 5. INSTALL INNER SEAT TRACK COVER (for Manual Seat) |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Engage the 2 claws and install the inner seat track cover.
 |
| 6. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Manual Seat) |
| 7. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connectors under the seat.
Connect the cable to the negative (-) battery terminal.
Temporarily install the front seat assembly with the 4 bolts.
Operate the power seat switch knob and move the seat to the rearmost position.
Tighten the 2 bolts on the front side of the seat.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
- HINT:
- Tighten the bolts in the order indicated in the illustration.
 |
Operate the power seat switch knob and move the seat to the foremost position.
Tighten the 2 bolts on the rear side of the seat.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
- HINT:
- Tighten the bolts in the order indicated in the illustration.
 |
| 8. INSTALL OUTER SEAT TRACK COVER (for Power Seat) |
Engage the 2 claws and install the outer seat track cover.
|
| 9. INSTALL INNER SEAT TRACK COVER (for Power Seat) |
Engage the 2 claws and install the inner seat track cover.
 |
| 10. INSTALL FRONT SEAT HEADREST ASSEMBLY (for Power Seat) |
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat) |
| 12. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag) |
| 13. INSPECT FRONT SEAT ASSEMBLY (for Power Seat) |
Inspect the power seat operation.