Tire Pressure Warning System Dtc Check / Clear

Suspension. Corolla. Zre142 Aze141
Tire Pressure Monitoring. Corolla. Zre142 Aze141

  1. DTC CHECK (USING SST CHECK WIRE)

  1. DTC CHECK (USING TECHSTREAM)

  1. CLEAR DTC

Tire Pressure Warning System -- Dtc Check / Clear



DTC CHECK (USING SST CHECK WIRE)


  1. Turn the ignition switch off.


    Corolla. Zre142 Aze141.Tire Pressure Monitoring.Tire Pressure Warning System.Tire Pressure Warning System Dtc Check / Clear

  2. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040

  3. Turn the ignition switch to ON.

  4. Read and record any DTCs from the tire pressure warning light on the combination meter. Refer to the illustration as examples of the normal system code and codes 13 and 23.

    HINT:
    1. If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.
      Trouble Area
      		See Procedure
      Tire pressure warning light circuit
      		COROLLA_ZRE142 RM000000XN305SX.html
    2. If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

  5. Refer to the Diagnostic Trouble Code Chart (COROLLA_ZRE142 RM000000XMR072X.html) for DTC information.

  6. After completing the check, turn the ignition switch off and remove SST from the DLC3.

    SST
    09843-18040

DTC CHECK (USING TECHSTREAM)

  1. Turn the ignition switch off.

  2. Connect the Techstream to the DLC3.

  3. Turn the ignition switch to ON.

  4. Turn the Techstream on.

  5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

  6. Read the DTCs following the prompts on the Techstream.

    HINT:
    Refer to the Techstream's operator's manual for further details.

CLEAR DTC
HINT:
After repairing the malfunctions, clear the DTCs.

  1. Turn the ignition switch off.

  2. Connect the Techstream to the DLC3.

  3. Turn the ignition switch to ON.

  4. Turn the Techstream on.

  5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

  6. Clear the DTCs following the prompts on the Techstream.

    HINT:
    Refer to the Techstream operator's manual for further details.