Spiral Cable Inspection

Vehicle Interior. Corolla. Zre142 Aze141
Supplemental Restraint Systems. Corolla. Zre142 Aze141

  1. INSPECT SPIRAL CABLE

Spiral Cable -- Inspection



1. INSPECT SPIRAL CABLE

  1. If there are any defects as mentioned below, replace the spiral cable with a new one:

    1. Scratches, cracks, dents or chips on the connector or the spiral cable.


    Corolla. Zre142 Aze141.Supplemental Restraint Systems.Airbag System.Spiral Cable Inspection
    Corolla. Zre142 Aze141.Supplemental Restraint Systems.Airbag System.Spiral Cable Inspection

  1. Inspect the spiral cable.

    1. Measure the resistance according to the value(s) in the table below.

      NOTICE:
      To avoid breakage of the spiral cable, do not turn the spiral cable more than necessary.
      If the value is not within the specified range, replace the spiral cable.
      Standard Resistance
      Tester connection
      		Condition
      		Specified condition
      Y1-1 - E6-8 (HO)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y1-5 - E6-12 (IL+2)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y1-8 - E6-4 (EAU)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y1-9 - E6-5 (AU2)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y1-10 - E6-6 (AU1)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y2-3 - E6-1 (CCS)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y2-4 - E6-2 (ECC)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y3-1 (D-) - E7-2 (D-)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y3-2 (D+) - E7-1 (D+)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y4-1 (D2-) - E7-3 (D2-)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right
      Y4-2 (D2+) - E7-4 (D2+)
      		Center
      		Below 1 Ω
      2.5 rotations to the left
      2.5 rotations to the right