Fuel Pump Disassembly

Disconnect the fuel sender gauge connector.

NOTICE:

Do not damage the wire harness.

Release the lock and slide the fuel sender gauge assembly to remove it.

NOTICE:

Make sure that the fuel sender gauge arm does not bend.

Release the claw and disconnect the fuel pump filter hose.

Remove the E-ring and separate the 2 claws, then remove the fuel pump sub-tank.

NOTICE:

Do not separate the tube indicated in the illustration (COROLLA_ZRE142 RM000001EEY04ZX.html).

Disconnect the fuel pump harness connector.

NOTICE:

Do not damage the wire harness.

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.

Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump filter and fuel pump from the fuel filter.

NOTICE:

1. Do not damage the fuel pump filter.
   
2. Do not remove the suction filter.
   
3. Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
   

Disconnect the fuel pump harness connector.

Remove the O-ring from the fuel pump.