Lumbar Switch -- Removal |
| 1. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 2. REMOVE OUTER SEAT TRACK COVER |
Operate the power seat switch knob and move the seat to the foremost position.
 |
Disengage the 2 claws and remove the outer seat track cover.
| 3. REMOVE INNER SEAT TRACK COVER |
Disengage the 2 claws and remove the inner seat track cover.
 |
| 4. REMOVE FRONT SEAT ASSEMBLY |
Remove the 2 bolts on the rear side of the seat.
 |
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
 |
Operate the power seat switch knob and move the seat to the center position. Also, operate the power seat switch knob and move the seatback to the upright position.
Disconnect the cable from the negative (-) battery terminal.
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (COROLLA_ZRE142 RM000000KT10H0X.html).
Disconnect the connectors under the seat.
Remove the seat.
- NOTICE:
- Be careful not to damage the vehicle body.
| 5. REMOVE RECLINING POWER SEAT SWITCH KNOB |
Using a screwdriver with the tip taped, disengage the 2 claws and remove the reclining power seat switch knob.
 |
| 6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
Using a screwdriver with the tip taped, disengage the 4 claws and remove the slide and vertical power seat switch knob.
 |
| 7. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY |
Remove the 2 hooks.
 |
Remove the 5 screws.
 |
Disengage the claw and the guide and remove the front seat cushion shield assembly.
| 8. REMOVE LUMBAR SWITCH |
Remove the 2 screws and remove the lumbar switch.
 |