Restraints. Camry. Acv40 Gsv40
Supplemental Restraint System. Camry. Acv40 Gsv40
DTC B1610/13 Front Airbag Sensor RH Malfunction |
DESCRIPTION
The front airbag sensor RH consists of the diagnostic circuit, the frontal deceleration sensor, etc.If the center airbag sensor assembly receives signals from the frontal deceleration sensor, it determines whether the SRS should be activated.
DTC B1610/13 is recorded when a malfunction is detected in the front airbag sensor RH circuit.
| DTC No. | DTC Detection Condition | Trouble Area |
| B1610/13 |
|
|
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK FRONT AIRBAG SENSOR RH |
Turn the ignition switch to the LOCK position.
 |
Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
Interchange the front airbag sensor LH with RH and connect the connectors to them.
Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
Turn the ignition switch to the ON position, and wait for at least 60 seconds.
Clear the DTCs stored in the memory (CAMRY_ACV40 RM000000XFE07JX.html).
Turn the ignition switch to the LOCK position.
Turn the ignition switch to the ON position, and wait for at least 60 seconds.
Check the DTCs (CAMRY_ACV40 RM000000XFE07JX.html).
- Result:
Result Proceed to DTC B1610/13 is output. A DTC B1615/14 is output. B DTC B1610/13 and B1615/14 are not output. C
- HINT:
- Codes other than DTC B1610/13 and B1615/14 may be output at this time, but they are not related to this check.
|
| ||||
|
| ||||
| C | ||
| ||