Radio Receiver Removal

Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.

Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

with Seat Heater System:

1. Disconnect each connector.
   

Open the lid of the upper console panel.

Apply protective tape to the area shown in the illustration.

Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

Disengage the 3 claws and the 5 clips.

Disengage the clamp.

Disconnect the connector and remove the upper console rear panel sub-assembly.

Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.

Remove the 2 screws <F>.

Disengage the 4 claws.

Disconnect each connector and remove the instrument cluster finish panel center sub-assembly.

HINT:

Set the shift lever in the D position.

Apply protective tape to the areas shown in the illustration.

Using a moulding remover, disengage the 3 clips.

Using a moulding remover, disengage the 4 clips.

Disconnect the connector and remove the instrument panel No. 2 register assembly.

Remove the 4 bolts.

Pull the radio receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.

Disconnect each connector and remove the radio receiver with heater control panel assembly.

Remove the 5 bolts and radio No. 1 bracket.

Remove the 5 bolts and radio No. 2 bracket.

Remove the radio receiver assembly as shown in the illustration.