Door Control Transmitter (W/O Entry And Start System) Removal

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

  1. REMOVE TRANSMITTER BATTERY

Door Control Transmitter (W/O Entry And Start System) -- Removal



1. REMOVE TRANSMITTER BATTERY


  1. Remove the transmitter battery.



      Camry. Acv40 Gsv40

    1. Using a screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      NOTICE:
      Do not use excessive force when prying open the housing cover.


    Camry. Acv40 Gsv40

  1. Remove the door control transmitter module from the transmitter housing case.



    Camry. Acv40 Gsv40

  1. Using a coin, or other flat object, pry open the transmitter cover.



    Camry. Acv40 Gsv40

  1. Remove the transmitter battery (lithium battery).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the battery (lithium battery) because doing so will deform the terminals.
    3. Do not touch the battery with wet hands. Water may result in corrosion.
    4. Do not touch or move any components inside the transmitter because handling the components may interfere with proper operation of the transmitter.