Body Electrical. Camry. Acv40 Gsv40
Wiper And Washer. Camry. Acv40 Gsv40
Headlight Cleaner Actuator -- Removal |
1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE) |
Remove the 7 clips and cool air intake duct seal.
![]() |
2. REMOVE FRONT BUMPER ASSEMBLY |
Put protective tape around the front bumper assembly.
![]() |
Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
- HINT:
- Use the same procedures for the RH side and LH side.
![]() |
Remove the 8 screws, 2 clips, 2 radiator grille protectors and bolt.
![]() |
Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.
- HINT:
- Use the same procedures for the RH side and LH side.
![]() |
Disconnect each connector.
Disconnect the headlight cleaner washer hose, and then remove the front bumper assembly.
![]() |
3. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY |
Extend the headlight washer nozzle sub-assembly.
![]() |
Disengage the 2 claws and remove the headlight washer nozzle sub-assembly.
4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY |
Disconnect the headlight washer hose.
![]() |
Remove the bolt.
Disengage the 2 claws and remove the headlight washer actuator sub-assembly.
![]() |