Starter Installation

Install the starter assembly and clutch flexible hose bracket with the 3 bolts.

Torque:

Bolt A:

37 N*m{380 kgf*cm, 28 ft.*lbf}

Bolt B:

12 N*m{120 kgf*cm, 9 ft.*lbf}

Connect the wire harness to terminal 30 and install the nut. Then, attach the terminal cap.

Torque:

9.8 N*m{100 kgf*cm, 87 in.*lbf}

Connect the terminal 50 connector to the starter assembly.

Install the starter assembly with the 2 bolts.

Torque:

37 N*m{380 kgf*cm, 28 ft.*lbf}

Connect the wire harness to terminal 30 and install the nut. Then, attach the terminal cap.

Torque:

9.8 N*m{100 kgf*cm, 87 in.*lbf}

Connect the terminal 50 connector to the starter assembly.

Install the air cleaner case with the 3 bolts.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the hose clamp.

Install the air cleaner filter element onto the air cleaner case.

Insert the hinges. Install the air cleaner cap sub-assembly with the 2 bolts.

Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.

NOTICE:

Make sure that the hose clamp is at the correct angle.

Connect the No. 2 ventilation hose to the air cleaner hose.

Connect the purge line hose to the clamp (^*1).

Connect the 2 purge VSV vacuum hoses (^*2).

Connect the purge VSV connector (^*3).

Connect the mass air flow meter connector (^*4).

Install the air cleaner inlet with the 2 bolts.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}