Combination Meter Installation

Connect the 2 connectors as shown in the illustration.

Secure the wire harness to the combination meter assembly.

Install the combination meter assembly as shown in the illustration.

Install the 4 screws.

Engage the guide and the 4 claws.

Install the instrument cluster finish panel with the 2 clips.

Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.

Connect each connector.

Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.

Engage the claw and install the upper steering column cover.

Engage the 2 claws.

Install the lower steering column cover with the 2 screws.

Torque:

2.0 N*m{20 kgf*cm, 18 in.*lbf}

Install the air hose and connect the connector.

Engage the claw and the 4 clips.

Connect the hood lock control cable assembly.

Engage the 2 claws and connect the connector.

Install the lower instrument panel finish panel LH with the screw and bolt.

Engage the 2 clips.

Install the cowl side trim sub-assembly LH with the cowl side trim clip.

Engage the 7 claws and 3 clips, then install the front door scuff plate LH.