Engine Rear Oil Seal Installation

Apply MP grease to a new oil seal lip.

Using SST and a hammer, tap in the oil seal.

SST

09223-15030
09950-70010(09951-07150)

Oil seal tap in depth:

-0.5 to 0.5 mm (-0.020 to 0.020 in.)

Using SST, hold the crankshaft.

SST

09213-70011(09213-70020)
09330-00021

Apply adhesive to 2 or 3 threads of the mounting bolt end.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

1. Install the front spacer, drive plate and rear spacer on the crankshaft.
   

2. Install and tighten the 8 mounting bolts uniformly in several steps.
   

   Torque:

   83 N*m{850 kgf*cm, 61 ft.*lbf}