Cruise Control System. Camry. Acv40 Gsv40
Cruise Control. Camry. Acv40 Gsv40
Clutch Switch -- Installation |
| 1. INSTALL CLUTCH SWITCH ASSEMBLY |
Fully loosen the lock nut of the clutch switch assembly.
Adjust the clutch switch until the threaded portion makes gentle contact with the cushion. Tighten the lock nut and verify the contact of the switch threaded portion with the cushion.
- Torque:
- 15.7 N*m{160 kgf*cm, 12 ft.*lbf}
 |
Connect the connector.
| 2. INSTALL MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) (for LHD) |
Install the main body ECU (cowl side junction block LH) with the 2 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 ft.*lbf}
 |
Connect all connectors.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (for LHD) |
Install the air hose and connect the connector.
 |
Engage the 2 claws and the DLC3.
Engage the claw and the 4 clips.
Instal the lower instrument panel finish panel LH with the screw <B> and bolt <A>.
| 4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD) |
Engage the 2 clips.
 |
Install the cowl side trim sub-assembly LH with the cowl side trim clip.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH (for LHD) |
Engage the 7 claws and 3 clips, then install the front door scuff plate LH.
 |
| 6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH (for RHD) |
| 7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD) |
- HINT:
- Use the same procedures for the RH side and the LH side.
| 8. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD) |
- HINT:
- Use the same procedures for the RH side and the LH side.