Door Control Switch Removal

Disengage the 2 clips and remove the front door lower frame bracket garnish.

Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws, and remove the front door inside handle bezel plug.

Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and remove the assist grip cover.

Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the courtesy light assembly.

Disconnect the connector.

Remove the 3 screws and clip (A).

Using a clip remover, disengage the 9 clips.

Pull up the front door trim board in the direction indicated by the arrow.

Disengage the reference bosses from the front door panel.

Raise the front door trim board to disengage the 4 claws and remove the front door trim board together with the front door inner glass weatherstrip.

Disengage the 2 claws and disconnect the front door inside handle sub-assembly.

Disconnect the connector.

Remove the 3 screws and the power window regulator master switch assembly.