Electrical Key Oscillator (For Front Floor) Removal

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

  1. REMOVE FRONT DOOR SCUFF PLATE RH

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

  3. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY

  4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)

  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

  7. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  9. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)

  10. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)

  11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)

  12. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

  13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  14. REMOVE CONSOLE BOX POCKET

  15. REMOVE CONSOLE BOX CARPET

  16. REMOVE CONSOLE BOX ASSEMBLY

  17. REMOVE NO. 1 CONSOLE BOX INSERT FRONT

  18. REMOVE FLOOR CARPET BRACKET RH

  19. REMOVE ELECTRICAL KEY OSCILLATOR

Electrical Key Oscillator (For Front Floor) -- Removal



1. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure for the RH side and LH side (CAMRY_ACV40 RM000001F2H01PX_02_0348.html).


2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT:
Use the same procedure for the RH side and LH side (CAMRY_ACV40 RM000001F2H01PX_02_0349.html).


3. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Disengage the 4 claws.

  1. Disengage the 2 guides and remove the No. 2 under cover sub-assembly.



4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

  1. Remove the bolt <A>.



    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Remove the 4 screws <B>.

  1. Disengage the 3 claws and 3 clips, and then remove the lower instrument panel sub-assembly.



5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    Camry. Acv40 Gsv40

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    Camry. Acv40 Gsv40

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



7. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.



8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.



9. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)


    Camry. Acv40 Gsv40

  1. Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

  1. with Seat Heater System:

    1. Disconnect each connector.



10. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.



    Camry. Acv40 Gsv40

  1. Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

  1. with Seat Heater System:

    1. Disconnect each connector.



11. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and the 5 clips.

  1. Disconnect the connector and remove the upper console rear panel sub-assembly.



12. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.



13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.

    HINT:
    Set the shift lever in the D position.


14. REMOVE CONSOLE BOX POCKET

  1. Remove the console box pocket.



15. REMOVE CONSOLE BOX CARPET


    Camry. Acv40 Gsv40

  1. Remove the console box carpet.



16. REMOVE CONSOLE BOX ASSEMBLY


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Remove the 2 screws <F>.



    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Remove the 2 bolts <G> and the console box assembly.



17. REMOVE NO. 1 CONSOLE BOX INSERT FRONT


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Remove the 3 screws <F>.

  1. Disengage the clip and remove the No. 1 console box insert front.



18. REMOVE FLOOR CARPET BRACKET RH


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Release the clamp.

  1. Turn back the floor carpet.



    Camry. Acv40 Gsv40

  1. Remove the 3 clips.

  1. Remove the floor carpet bracket RH.



19. REMOVE ELECTRICAL KEY OSCILLATOR


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Electrical Key Oscillator (For Front Floor) Removal

  1. Disengage the clamp to remove the electrical key oscillator.