Brake. Camry. Acv40 Gsv40
Brake Control. Camry. Acv40 Gsv40
Anti-Lock Brake System -- Data List / Active Test |
| DATA LIST |
- HINT:
- According to the Data List displayed by the intelligent tester, the value of the switch, sensor, actuator and other items can be read without removing any parts. Reading the Data List as a first step in troubleshooting is one of the methods to save labor time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
According to the display on the tester, read the "Data List".
Data List: Tester Display Measurement Item/Range Normal Condition Diagnostic Note ABS Warning Lamp ABS warning light ON /OFF ON: ABS warning light ON
OFF: ABS warning light off- BRAKE Warning Lamp Brake warning light ON / OFF ON: Brake warning light ON
OFF: Brake warning light off- Stop Lamp SW Stop light switch / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released- Parking Brake SW Parking brake switch / ON or OFF ON: Parking brake applied
OFF: Parking brake released- FR Wheel Speed Wheel speed sensor (FR) reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Speed indicated on speedometer FL Wheel Speed Wheel speed sensor (FL) reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Speed indicated on speedometer RR Wheel Speed Wheel speed sensor (RR) reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Speed indicated on speedometer RL Wheel Speed Wheel speed sensor (RL) reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Speed indicated on speedometer Vehicle Speed Vehicle speed reading / min.: 0 km/h (0 mph), max.: 326 km/h (202 mph) Actual wheel speed Speed indicated on speedometer FR Wheel Acceleration Front right wheel acceleration / Min.: -200.84 m/s, Max.: 199.27 m/s 0 m/s - FL Wheel Acceleration Front left wheel acceleration / Min.: -200.84 m/s, Max.: 199.27 m/s 0 m/s - RR Wheel Acceleration Rear right wheel acceleration / Min.: -200.84 m/s, Max.: 199.27 m/s 0 m/s - RL Wheel Acceleration Rear left wheel acceleration / Min.: -200.84 m/s, Max.: 199.27 m/s 0 m/s - FR ABS Wheel ABS Ctrl Status Front right ABS control status / ON or OFF ON: During ABS control
OFF: Not ABS control- FL Wheel ABS Ctrl Status Front left ABS control status / ON or OFF ON: During ABS control
OFF: Not ABS control- RR Wheel ABS Ctrl Status Rear right ABS control status / ON or OFF ON: During ABS control
OFF: Not ABS control- RL Wheel ABS Ctrl Status Rear left ABS control status / ON or OFF ON: During ABS control
OFF: Not ABS control- FR Wheel EBD Ctrl Status Front right EBD control status / ON or OFF ON: During EBD control
OFF: Not EBD control- FL Wheel EBD Ctrl Status Front left EBD control status / ON or OFF ON: During EBD control
OFF: Not EBD control- RR Wheel EBD Ctrl Status Rear right EBD control status / ON or OFF ON: During EBD control
OFF: Not EBD control- RL Wheel EBD Ctrl Status Rear left EBD control status / ON or OFF ON: During EBD control
OFF: Not EBD control- Solenoid Relay Solenoid relay / ON or OFF ON: Solenoid relay ON
OFF: Solenoid relay OFF- ABS Motor Relay ABS motor relay / ON or OFF ON: During pump motor operation
OFF: No pump motor operation- ABS Solenoid (SFRH) ABS solenoid (SFRH) ON / OFF ON: Operates - ABS Solenoid (SFRR) ABS solenoid (SFRR) ON / OFF ON: Operates - ABS Solenoid (SFLH) ABS solenoid (SFLH) ON / OFF ON: Operates - ABS Solenoid (SFLR) ABS solenoid (SFLR) ON / OFF ON: Operates - ABS Solenoid (SRRH) ABS solenoid (SRRH (SRH)) ON / OFF ON: Operates - ABS Solenoid (SRRR) ABS solenoid (SRRR (SRR)) ON / OFF ON: Operates - ABS Solenoid (SRLH) ABS solenoid (SRLH) ON / OFF ON: Operates - ABS Solenoid (SRLR) ABS solenoid (SRLR) ON / OFF ON: Operates - Test Mode Test mode / NORMAL or TEST NORMAL: Normal mode
TEST: During test mode- Number of DTC Number of DTCs recorded / min.: 0, max.: 255 Min.: 0, max.: 19 - IG Voltage ECU power supply voltage / NORMAL or TOO LOW NORMAL: 9.5 V or over
TOO LOW: Below 9.5 V-
 |
| ACTIVE TEST |
- HINT:
- Performing the Active Test using the intelligent tester allows the relay, actuator and other items to operate without removing any parts. Performing the Active Test as a first step in troubleshooting is one of the methods to save labor time.
- It is possible to display the Data List during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
According to the display on the tester, perform the "Active Test".
Active Test: Tester Display Test Part Control Range Diagnostic Note ABS Warning Lamp Turns ABS warning light Warning light ON / OFF Observe combination meter Brake Warning Lamp Turns Brake warning light Warning light ON / OFF Observe combination meter Motor Relay Turns ABS motor relay Motor relay ON / OFF Operating sound of motor can be heard ABS Solenoid (SRLR) Turns ABS solenoid (SRLR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SRLH) Turns ABS solenoid (SRLH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SRRR) Turns ABS solenoid (SRRR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SRRH) Turns ABS solenoid (SRRH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SFLR) Turns ABS solenoid (SFLR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SFLH) Turns ABS solenoid (SFLH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SFRR) Turns ABS solenoid (SFRR) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard ABS Solenoid (SFRH) Turns ABS solenoid (SFRH) Solenoid ON / OFF Operating sound of solenoid (clicking sound) can be heard