Air Conditioning System Actuator Check

Heater & Air Conditioning System. Camry. Acv40 Gsv40
Air Conditioning. Camry. Acv40 Gsv40

  1. ACTUATOR CHECK

Air Conditioning System -- Actuator Check



ACTUATOR CHECK

  1. Start the engine and warm it up.

  2. Perform the indicator check (CAMRY_ACV40 RM000000T8Q03WX.html).



    3. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Actuator Check

  3. Push the "R/F" switch to perform the actuator check.

    HINT:
    Be sure to perform the actuator check after starting the engine.


    4. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Actuator Check

  4. As the actuator check is repeated from steps 1 to 10 at 1 second intervals, check the temperature and air flow visually and by hand.

    HINT:
    1. The display blinks at 1 second intervals in the step operation.
    2. Push the "OFF" switch to finish panel diagnosis.
    3. Push the "AUTO" switch to enter the sensor check mode.

    Step No.
    		Display Code
    		Conditions
    Blower Level
    		Air Mix Damper
    		Airflow Vent
    		Air Inlet Damper
    		Compressor
    1
    		0
    		0
    		0% open
    		FACE
    		FRESH
    		OFF
    2
    		1
    		1
    		0% open
    		FACE
    		FRESH
    		OFF
    3
    		2
    		17
    		0% open
    		FACE
    		RECIRCULATION / FRESH
    		ON
    4
    		3
    		17
    		0% open
    		FACE
    		RECIRCULATION
    		ON
    5
    		4
    		17
    		50% open
    		B/L
    		RECIRCULATION
    		ON
    6
    		5
    		17
    		50% open
    		B/L
    		RECIRCULATION
    		ON
    7
    		6
    		17
    		50% open
    		FOOT
    		FRESH
    		ON
    8
    		7
    		17
    		100% open
    		FOOT-0
    		FRESH
    		ON
    9
    		8
    		17
    		100% open
    		F/D
    		FRESH
    		ON
    10
    		9
    		31
    		100% open
    		DEF
    		FRESH
    		ON


    5. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Actuator Check

  5. If the steps are difficult to read because they change automatically, push the "MODE" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "MODE" switch is pushed.

    HINT:
    1. Push the "OFF" switch to finish panel diagnosis.
    2. Push the "R/F" switch to enter the sensor check mode.