Steering Pad Switch Inspection

Body Electrical. Camry. Acv40 Gsv40
Meter. Camry. Acv40 Gsv40

  1. INSPECT STEERING PAD SWITCH

Steering Pad Switch -- Inspection



1. INSPECT STEERING PAD SWITCH


  1. Disconnect the steering pad switch connector.


    Camry. Acv40 Gsv40.Meter.Meter / Gauge System.Steering Pad Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:

    Tester Connection
    		Condition
    		Specified Condition
    a1- 7 (DISP) - a1-9 (EAU)
    		DISP switch is not pushed in.
    		10 kΩ or higher
    a1- 7 (DISP) - a1-9 (EAU)
    		DISP switch is pushed in.
    		Below 1 Ω
    HINT:
    1. This inspection is needed only for 4 spoke model steering pad switch.
    1. If the value is not as specified, replace the steering pad switch.