Shift Lever -- Removal |
- HINT:
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE LH |
Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.
 |
| 3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH |
Remove the cowl side trim clip.
 |
Disengage the 2 clips and remove the cowl side trim sub-assembly LH.
| 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH |
Remove the bolt <A> and the screw <B>.
 |
Disengage the 2 claws and the DLC3.
Disconnect the hood lock control cable assembly.
Disengage the claw and the 4 clips.
Remove the air hose, disconnect the connector, and then remove the lower instrument panel finish panel LH.
| 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL |
Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.
 |
| 6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
 |
| 7. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.
 |
| 8. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.
 |
| 9. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY |
Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.
 |
with Seat Heater System:
Disconnect each connector.
| 10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY |
Disengage the 3 claws and the 5 clips.
 |
Disengage the clamp.
Disconnect the connector and remove the upper console rear panel sub-assembly.
| 11. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY |
Remove the 2 screws <F>.
 |
Disengage the 4 claws.
Disconnect each connector and remove the instrument cluster finish panel center sub-assembly.
- HINT:
- Set the shift lever in the D position.
| 12. REMOVE CONSOLE BOX POCKET |
Remove the console box pocket.
| 13. REMOVE CONSOLE BOX CARPET |
Remove the console box carpet.
 |
| 14. REMOVE CONSOLE BOX ASSEMBLY |
Remove the 2 screws <F>.
 |
Remove the 2 bolts <G> and the console box assembly.
 |
| 15. REMOVE NO. 2 CONSOLE BOX INSERT FRONT |
Remove the 3 screws <F>.
 |
Disengage the clip and remove the No. 2 console box insert front.
| 16. REMOVE FLOOR CARPET BRACKET LH |
Release the clamp.
 |
Turn back the floor carpet.
Remove the 3 clips.
 |
Remove the floor carpet bracket LH.
| 17. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
Disconnect the end of the transmission control cable from the shift lock control unit.
 |
Disconnect the transmission control cable assembly from the transmission floor shift assembly while pushing the 2 claws of the floor shift cable.
| 18. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY |
Disconnect the shift lock control ECU connector and indicator light wire connector.
 |
Remove the 4 bolts and shift control unit assembly.
 |