Shift Lever Adjustment

Move the shift lever to the N position.

Remove the nut and transmission control cable from the control shaft lever.

Align the protrusions of the park/neutral position switch.

Move the slider in the directions indicated by the arrows and pull up the lock piece.

NOTICE:

Do not damage the boot.

Connect the transmission control cable assembly to the control shaft lever with the nut.

Torque:

13 N*m{130 kgf*cm, 9 ft.*lbf}

Push in the lock piece.

NOTICE:

Firmly push in the lock piece until the slider lock is engaged.

Start the engine and make sure that the vehicle moves forward when moving the lever from the N to the D position and moves rearward when moving it to the R position.
If it becomes hard to move the shift lever, readjust the shift lever position.