Seat Belt Warning System Driver Side Seat Belt Warning Light Does Not Operate

Restraints. Camry. Acv40 Gsv40
Seat Belt. Camry. Acv40 Gsv40

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FOR DTCs

PERFORM ACTIVE TEST USING INTELLIGENT TESTER

SEAT BELT WARNING SYSTEM - Driver Side Seat Belt Warning Light does not Operate


DESCRIPTION

When the driver seat belt is not fastened with the ignition switch ON, the driver seat belt warning light on the combination meter assembly comes on to inform the driver. The center airbag assembly detects the driver seat belt status and sends signals to the combination meter assembly using CAN.
NOTICE:
The seat belt warning system uses CAN. Before troubleshooting the seat belt warning system, perform "COMMUNICATION FUNCTION CHECK" by following "HOW TO PROCEED WITH TROUBLESHOOTING" to confirm that the communication systems are normal.

WIRING DIAGRAM


Camry. Acv40 Gsv40.Seat Belt.Occupant Detection Sensor (For Manual Seat).Seat Belt Warning System Driver Side Seat Belt Warning Light Does Not Operate


INSPECTION PROCEDURE

1.CHECK FOR DTCs

  1. Check for DTCs.


Result:

Result
Proceed to
Output DTC (CAN communication system)
A
Output DTC (Airbag system)
B
No output DTC
C


A
GO TO CAN COMMUNICATION SYSTEM

B
GO TO AIRBAG SYSTEM
C


2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER

  1. Operate the intelligent tester according to the steps on the display and select "ACTIVE TEST".


METER:

Item
Test Details
Diagnostic Note
D-BELT REMIND
D-SEAT BELT indicator light (OFF/ON)
Confirm that the vehicle is stopped with the engine idling
OK:
Switch condition (ON/OFF) can be switched by "ACTIVE TEST".


NG
REPLACE COMBINATION METER ASSEMBLY
OK

END