Suspension & Axle. Camry. Acv40 Gsv40
Suspension. Camry. Acv40 Gsv40
Rear Stabilizer Bar -- Removal |
- NOTICE:
- Check if an old gasket still remains on the pipe. If so, remove it. Also, check if any bolts or nuts are rusted. If so, replace them.
| 1. REMOVE REAR WHEELS |
| 2. REMOVE CENTER EXHAUST PIPE ASSEMBLY (for 2AZ-FE) |
Remove the 2 bolts, 2 nuts and center exhaust pipe assembly.
Remove the gasket from the front exhaust pipe.
| 3. REMOVE TAIL EXHAUST PIPE ASSEMBLY (for 2GR-FE) |
Remove the 4 nuts and 2 exhaust tail pipes.
Remove the 2 gaskets from the exhaust tail pipes.
| 4. REMOVE CENTER EXHAUST PIPE ASSEMBLY (for 2GR-FE) |
Remove the 2 bolts, 2 nuts and exhaust center pipe assembly.
Remove the gasket from the exhaust center pipe assembly.
| 5. REMOVE REAR STABILIZER LINK ASSEMBLY LH |
Remove the 2 nuts and rear stabilizer link assembly LH.
- HINT:
- If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
 |
| 6. REMOVE REAR STABILIZER LINK ASSEMBLY RH |
Remove the 2 nuts and rear stabilizer link assembly RH.
- HINT:
- If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
 |
| 7. REMOVE REAR STABILIZER BAR NO. 2 BRACKET |
Remove the 2 bolts and rear stabilizer bar No. 2 bracket.
 |
| 8. REMOVE REAR STABILIZER BAR NO. 1 BRACKET |
Remove the 2 bolts and rear stabilizer bar No. 1 bracket.
 |
| 9. REMOVE REAR STABILIZER BUSHING |
Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
| 10. REMOVE REAR STABILIZER BAR |