Transmission. Camry. Acv40 Gsv40
U660E Automatic Transaxle. Camry. Acv40 Gsv40
Shift Lock System -- On-Vehicle Inspection |
| 1. CHECK SHIFT LOCK OPERATION |
Move the shift lever to P.
Turn the engine switch off.
Check that the shift lever cannot be moved from P to any other position
Turn the engine switch on (IG), depress the brake pedal, and check that the shift lever can be moved from P to any other position.
If the operation cannot be done as specified, inspect the shift lock control unit.
| 2. CHECK SHIFT LOCK RELEASE BUTTON OPERATION |
Turn the engine switch off.
When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.
If the operation cannot be done as specified, check the shift lever assembly installation condition.
| 3. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY |
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection Condition Specified Condition 12 (IG) - 3 (E) Engine switch on (IG) 11 to 14 V Engine switch off Below 1 V 6 (STP) - 3 (E) Brake pedal depressed 11 to 14 V Brake pedal released Below 1 V
- HINT:
- Do not disconnect the shift lock control unit assembly connector.
 |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 (E) - Body ground Always Below 1 Ω
- HINT:
- Do not disconnect the shift lock control unit assembly connector.
 |