Steering Lock System How To Proceed With Troubleshooting

Steering. Camry. Acv40 Gsv40
Steering Column. Camry. Acv40 Gsv40

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK AND CLEAR DTCs*

  4. PROBLEM SYMPTOM CONFIRMATION

  5. SYMPTOM SIMULATION

  6. CHECK CAN COMMUNICATION SYSTEM*

  7. CHECK LIN COMMUNICATION SYSTEM*

  8. DTC CHECK*

  9. PROBLEM SYMPTOMS TABLE

  10. OVERALL ANALYSIS AND TROUBLESHOOTING*

  11. REPAIR OR REPLACEMENT

  12. CONFIRMATION TEST*

Steering Lock System -- How To Proceed With Troubleshooting


HINT:
  1. Perform troubleshooting in accordance with the following flowchart.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    NEXT


    3.CHECK AND CLEAR DTCs*

      NEXT


      4.PROBLEM SYMPTOM CONFIRMATION
        Result:
        Result
        		Proceed to
        Symptom does not occur.
        		A
        Symptom occurs.
        		B


      		B.
      GO TO STEP 6
      A


      5.SYMPTOM SIMULATION

        NEXT


        6.CHECK CAN COMMUNICATION SYSTEM*

        1. Use the intelligent tester to check if the CAN communication system is functioning normally (CAMRY_ACV40 RM000000WIB05NX.html for LHD or CAMRY_ACV40 RM000000WIB05SX.html for RHD).

          Result:
          Result
          		Proceed to
          CAN communication DTC is not output.
          		A
          CAN communication DTC is output (for LHD).
          		B
          CAN communication DTC is output (for RHD).
          		C


        		B.
        GO TO CAN COMMUNICATION SYSTEM (CAMRY_ACV40 RM000000WIB05NX.html)

        		C.
        GO TO CAN COMMUNICATION SYSTEM (CAMRY_ACV40 RM000000WIB05SX.html)
        A


        7.CHECK LIN COMMUNICATION SYSTEM*

        1. Use the intelligent tester to check if the LIN communication system is functioning normally (CAMRY_ACV40 RM000002XHS00KX.html).

          Result:
          Result
          		Proceed to
          LIN communication DTC is not output.
          		A
          LIN communication DTC is output.
          		B


        		B.
        GO TO LIN COMMUNICATION SYSTEM (CAMRY_ACV40 RM000002XHI01QX.html)
        A


        8.DTC CHECK*

        1. Check for DTCs (CAMRY_ACV40 RM000000XWT02QX.html).

          Result:
          Result
          		Proceed to
          DTC is output.
          		A
          DTC is not output.
          		B


        		A.
        GO TO STEP 9
        B


        9.PROBLEM SYMPTOMS TABLE
          Result:
          Result
          		Proceed to
          Fault is not listed in problem symptoms table.
          		A
          Fault is listed in problem symptoms table.
          		B


        		B.
        GO TO STEP 11
        A


        10.OVERALL ANALYSIS AND TROUBLESHOOTING*

        1. Terminals of ECU (CAMRY_ACV40 RM000000XWO02EX.html).

        2. Data List / Active Test (CAMRY_ACV40 RM000000XWV02CX.html).


        NEXT


        11.REPAIR OR REPLACEMENT

          NEXT


          12.CONFIRMATION TEST*

            NEXT

            END