Vehicle Stability Control System Data List / Active Test

Brake. Camry. Acv40 Gsv40
Brake Control. Camry. Acv40 Gsv40
  1. DATA LIST

  1. ACTIVE TEST

Vehicle Stability Control System -- Data List / Active Test



DATA LIST
HINT:
With the intelligent tester connected to the DLC3 and the ignition switch on (IG), the ABS, TRC and VSC Data List can be displayed. Follow the prompts on the tester screen to access the Data List.

Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
ABS Motor Relay
ABS motor relay / ON or OFF
ON: Motor relay ON
OFF: Motor relay OFF
-
Solenoid Relay
Solenoid relay / ON or OFF
ON: Solenoid relay ON
OFF: Solenoid relay OFF
-
Fail Safe Motor Relay
Fail safe motor relay / ON or OFF
ON: Motor relay ON
OFF: Motor relay OFF
-
Main Idle SW
Main idle switch / ON or OFF
ON: Accelerator pedal released
OFF: Accelerator pedal depressed
-
Stop Lamp SW
Stop light switch / ON or OFF
ON: Brake pedal depressed
OFF: Brake pedal released
-
Parking Brake SW
Parking brake switch / ON or OFF
ON: Parking brake applied
OFF: Parking brake released
-
Engine Revolutions
Engine revolutions / min.: 0 r/min, max.: 65535 r/min
-
-
Gear Position
Gear position information / P/N, R, 1st-6th, FAIL, NOT R
-
-
Shift Lever Position
Shift lever position information / P/N, R, D/M, 1st-6th/B, FAIL
-
-
Shift Information
Shift information / ON or OFF
ON: During gear change
-
FR Wheel Speed
FR wheel speed sensor reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)
Actual wheel speed
Similar speed as indicated on speedometer
FL Wheel Speed
FL wheel speed sensor reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)
Actual wheel speed
Similar speed as indicated on speedometer
RR Wheel Speed
RR wheel speed sensor reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)
Actual wheel speed
Similar speed as indicated on speedometer
RL Wheel Speed
RL wheel speed sensor reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)
Actual wheel speed
Similar speed as indicated on speedometer
Deceleration Sensor
Acceleration sensor 1 reading / min.: -1.889 G, max.: 1.875 G
Approximately 0+-0.13 G while stationary
Reading changes when vehicle is bounced
Deceleration Sensor 2
Acceleration sensor 2 reading / min.: -1.889 G, max.: 1.875 G
Approximately 0+-0.13 G while stationary
Reading changes when vehicle is bounced
ABS Solenoid (SFRR)
ABS solenoid (SFRR) / ON or OFF
ON: Operates
-
ABS Solenoid (SFRH)
ABS solenoid (SFRH) / ON or OFF
ON: Operates
-
ABS Solenoid (SFLR)
ABS solenoid (SFLR) / ON or OFF
ON: Operates
-
ABS Solenoid (SFLH)
ABS solenoid (SFLH) / ON or OFF
ON: Operates
-
ABS Solenoid (SRRR)
ABS solenoid (SRRR) / ON or OFF
ON: Operates
-
ABS Solenoid (SRRH)
ABS solenoid (SRRH) / ON or OFF
ON: Operates
-
ABS Solenoid (SRLR)
ABS solenoid (SRLR) / ON or OFF
ON: Operates
-
ABS Solenoid (SRLH)
ABS solenoid (SRLH) / ON or OFF
ON: Operates
-
TR(A)C/VSC Solenoid (SM1)
Master cut solenoid (SM1) / ON or OFF
ON: Operates
-
TR(A)C/VSC Solenoid (SM2)
Master cut solenoid (SM2) / ON or OFF
ON: Operates
-
Vehicle Speed
Maximum wheel speed sensor reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)
Actual vehicle speed
Speed indicated on speedometer
Yaw Rate Sensor
Yaw rate sensor 1 / min.: -128 deg/s, max.: 127 deg/s
Min.: -128 deg/s
Max.: 127 deg/s
-
Zero Point of Yaw Rate
Memorized zero value / min.: -128 deg/s, max.: 127 deg/s
Min.: -128 deg/s
Max.: 127 deg/s
-
Steering Angle Sensor
Steering angle sensor / min.: -3,276.8 deg, max.: 3,276.7 deg
Left turn: Increase
Right turn: Decrease
-
Master Cylinder Sensor
Master cylinder pressure sensor 1 reading / min.: 0 V, max.: 5 V
When brake pedal is released: 0.3 to 0.5 V
Reading increases when brake pedal is depressed
Accelerator Opening Angle %
The difference of a present accelerator / min.: 0%, max.: 128%
-
-
Real Engine Torque
Real engine torque / min.: -1,024 N*m, max.: 1,023 N*m
-
-
FR Speed Open
FR speed sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
FL Speed Open
FL speed sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
RR Speed Open
RR speed sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
RL Speed Open
RL speed sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
Yaw Rate Open
Yaw rate sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
Deceleration Open
Acceleration sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
Steering Open
Steering angle sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
Master Cylinder Open
Master cylinder pressure sensor open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
EFI Communication Open
EFI communication open detection / ERROR or NORMAL
ERROR: Momentary interruption
NORMAL: Normal
-
Number of DTC
Number of DTC / min.: 0, max.: 255
-
-
ABS Warning Lamp
ABS warning light / ON or OFF
ON: Warning light ON
OFF: Warning light OFF
-
Brake Warning Lamp
BRAKE warning light / ON or OFF
ON: Warning light ON
OFF: Warning light OFF
-
Slip Indicator Lamp
SLIP indicator light / ON or OFF
ON: Indicator light ON
OFF: Indicator light OFF
-
Buzzer
Skid control buzzer / ON or OFF
ON: Buzzer ON
OFF: Buzzer OFF
-
Zero Point of M/C
Memorized zero value / min.: -12.5 MPa, max.: 12.4 MPa
Min.: -12.5 MPa
Max.: 12.4 MPa
-
FR Wheel Acceleration
FR wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
FL Wheel Acceleration
FL wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
RR Wheel Acceleration
RR wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
RL Wheel Acceleration
RL wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
Zero Point of Decele
Memorized zero value / min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -25.11 m/s2
Max.: 24.91 m/s2
-
Zero Point of Decele 2
Memorized zero value / min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -25.11 m/s2
Max.: 24.91 m/s2
-
Zero Point of Steering Angle
Memorized zero value / min.: -3,276.8 deg, max.: 3,276.7 deg
Min.: -3,276.8 deg
Max.: 3,276.7 deg
-
Lateral G
Lateral G / min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -25.11 m/s2
Max.: 24.91 m/s2
-
Forward and Rearward G
Forward and rearward G / min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -25.11 m/s2
Max.: 24.91 m/s2
-
Yaw Rate Value
Yaw rate value / min.: -128 deg/s, max.: 127 deg/s
Min.: -128 deg/s
Max.: 127 deg/s
-
Steering Angle Value
Steering angle value / min.: -3,276.8 deg, max.: 3,276.7 deg
Min.: -3,276.8 deg
Max.: 3,276.7 deg
-
TRC (TRAC) Ctrl Status
TRC control status / ON or OFF
ON: During the control
-
TRC (TRAC) Engine Ctrl Status
TRC engine control status / ON or OFF
ON: During the control
-
TRC (TRAC) Brake Ctrl Status
TRC brake control status / ON or OFF
ON: During the control
-
FR Wheel VSC Ctrl Status
FR wheel VSC control status / ON or OFF
ON: During the control
-
FL Wheel VSC Ctrl Status
FL wheel VSC control status / ON or OFF
ON: During the control
-
RR Wheel VSC Ctrl Status
RR wheel VSC control status / ON or OFF
ON: During the control
-
RL Wheel VSC Ctrl Status
RL wheel VSC control status / ON or OFF
ON: During the control
-
FR Wheel ABS Ctrl Status
FR wheel ABS control status / ON or OFF
ON: During the control
-
FL Wheel ABS Ctrl Status
FL wheel ABS control status / ON or OFF
ON: During the control
-
RR Wheel ABS Ctrl Status
RR wheel ABS control status / ON or OFF
ON: During the control
-
RL Wheel ABS Ctrl Status
RL wheel ABS control status / ON or OFF
ON: During the control
-
RR Wheel EBD Ctrl Status
RR wheel EBD control status / ON or OFF
ON: During the control
-
RL Wheel EBD Ctrl Status
RL wheel EBD control status / ON or OFF
ON: During the control
-
BA Ctrl Status
BA control status / ON or OFF
ON: During the control
-
PBA Ctrl Status
PBA control status / ON or OFF
ON: During the control
-
Inspection Mode
Inspection mode / OTHER or INSPECT
-
-
Number of IG ON (Inspection)
Number of ignition switch on (IG) after entering the inspection mode / min.: 0, max.: 255
-
-

ACTIVE TEST
HINT:
Performing the Active Test using the intelligent tester allows the relay, actuator, and other items to operate without removing any parts. Performing the Active Test as the first step in troubleshooting is one of the methods to save labor time.
It is possible to display the Data List during the Active Test.
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. On the tester display, select the Active Test.

    HINT:
    The ignition switch must be turned on (IG) to proceed to the Active Test using the intelligent tester.

    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    ABS Solenoid (SFRR)
    ABS solenoid (SFRR)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFRH)
    ABS solenoid (SFRH)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFLR)
    ABS solenoid (SFLR)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFLH)
    ABS solenoid (SFLH)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRRR)
    ABS solenoid (SRRR)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRRH)
    ABS solenoid (SRRH)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRLR)
    ABS solenoid (SRLR)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRLH)
    ABS solenoid (SRLH)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    VSC/TRC Solenoid (SMF)
    Master cut solenoid (SM1)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    VSC/TRC Solenoid (SMR)
    Master cut solenoid (SM2)
    Solenoid ON/OFF
    Operating sound of solenoid (clicking sound) can be heard
    Solenoid Relay
    ABS solenoid relay
    Relay ON/OFF
    -
    Motor Relay
    ABS motor relay
    Relay ON/OFF
    Operating sound of relay (clicking sound) and motor can be heard
    ABS Warning Lamp
    ABS warning light
    Light ON/OFF
    Observe combination meter
    Slip Indicator Lamp
    SLIP indicator light
    Light ON/OFF
    Observe combination meter
    Brake Warning Lamp
    BRAKE warning light
    Light ON/OFF
    Observe combination meter
    Buzzer
    Skid control buzzer
    Buzzer ON/OFF
    Buzzer can be heard