Automatic Transaxle System Initialization

Transmission. Camry. Acv40 Gsv40
U660E Automatic Transaxle. Camry. Acv40 Gsv40

  1. RESET TRANSAXLE COMPENSATION CODE

  1. PERFORM ROAD TEST TO ALLOW TCM TO LEARN

  1. RESET MEMORY

Automatic Transaxle System -- Initialization



RESET TRANSAXLE COMPENSATION CODE
NOTICE:
The transaxle compensation code can be reset only with the intelligent tester.
HINT:
The TCM memorizes the condition that the ECT controls the automatic transaxle assembly and engine assembly according to those characteristics. Therefore, when the automatic transaxle assembly, engine assembly, or TCM has been replaced, it is necessary to reset the memory so that the TCM can memorize the new information.
Reset procedure is as follows:

  1. Shift the shift lever to the N or P position.

  2. Turn the ignition switch off.

  3. Connect the intelligent tester to the DLC3.

  4. Turn the ignition switch on and push the intelligent tester main switch on.



    5. Camry. Acv40 Gsv40

  5. Enter the menu items in this order: Powertrain / ECT / Utility / A/T Code Reset.

  6. Press "Next".



    7. Camry. Acv40 Gsv40

  7. Press "Next" again to proceed.

    CAUTION:
    After the transaxle compensation code is reset, be sure to perform a road test to allow the TCM to learn.


    8. Camry. Acv40 Gsv40

  8. Press "Exit".


PERFORM ROAD TEST TO ALLOW TCM TO LEARN
NOTICE:
Perform the following procedures while strictly observing all traffic laws and speed limits.

  1. From a standstill, achieve highest possible speed with the accelerator pedal opened 15% or less. Keep the accelerator pedal angle steady while driving the vehicle.

  2. Repeat the previous step until shift shock no longer occurs.

  3. From a standstill, achieve highest possible speed with the accelerator pedal opened 25% or more. Keep the accelerator pedal angle steady while driving the vehicle.

  4. Repeat the previous step until shift shock no longer occurs.


RESET MEMORY
NOTICE:
  1. Perform the RESET MEMORY (AT initialization) when replacing the engine assembly.
  2. The RESET MEMORY can be performed only with the Intelligent tester.
HINT:
The TCM memorizes the condition that the ECT controls the automatic transaxle assembly and engine assembly according to those characteristics. Therefore, when the automatic transaxle assembly or TCM has been replaced, it is necessary to reset the memory so that the TCM can memorize the new information.


  1. Reset procedure is as follows.

    1. Turn the ignition switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the ignition switch to the on position.

    4. Turn the intelligent tester main switch on.



    5. Select the following items: "Powertrain / ECT / Reset Memory".


      Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Automatic Transaxle System Initialization

      NOTICE:
      After performing the RESET MEMORY, be sure to perform the ROAD TEST (CAMRY_ACV40 RM000000W79029X.html) described earlier.