Automatic Transaxle System Manual Shifting Test

Transmission. Camry. Acv40 Gsv40
U660E Automatic Transaxle. Camry. Acv40 Gsv40

  1. PERFORM MANUAL SHIFTING TEST

Automatic Transaxle System -- Manual Shifting Test



PERFORM MANUAL SHIFTING TEST
HINT:
  1. With this test, it can be determined whether trouble occurs in the electrical circuit or is a mechanical problem in the transaxle.
  2. If any abnormalities are found in the following test, the problem is in the transaxle itself.


    Camry. Acv40 Gsv40

  1. Disconnect the TCM connector.

  2. Drive the vehicle with the TCM disconnected.
    Shifting the shift lever to the D position to check whether the shifting condition changes as shown in the table below.

    Shift Position
    		Shifting Condition
    D
    		No Shift (No Change)
    HINT:
    When driving the vehicle with the TCM disconnected, the gear position will be as follows:
    1. When the shift lever is in the D position, the transmission will stay in 3rd gear.
    2. When the shift lever is in the R or P position, the transmission will also be in the R or P position respectively.

  3. Connect the connector of the TCM.

  4. Clear the DTC (CAMRY_ACV40 RM000000W77098X.html).