Side Airbag Sensor Removal

Restraints. Camry. Acv40 Gsv40
Supplemental Restraint System. Camry. Acv40 Gsv40

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT DOOR SCUFF PLATE

  4. REMOVE REAR DOOR SCUFF PLATE

  5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP

  6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

  7. REMOVE LOWER CENTER PILLAR GARNISH

  8. REMOVE SIDE AIRBAG SENSOR

Side Airbag Sensor -- Removal


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. PRECAUTION
CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (CAMRY_ACV40 RM000000KT10BKX.html).
NOTICE:
w/ Navigation System for HDD:
After the ignition switch is turned off, the navigation receiver assembly (HDD navigation system) records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.


3. REMOVE FRONT DOOR SCUFF PLATE


    Camry. Acv40 Gsv40

  1. Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.



4. REMOVE REAR DOOR SCUFF PLATE


    Camry. Acv40 Gsv40

  1. Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.



5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP


6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP


7. REMOVE LOWER CENTER PILLAR GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and 2 clips, and remove the lower center pillar garnish LH.



8. REMOVE SIDE AIRBAG SENSOR


    Camry. Acv40 Gsv40

  1. Remove the bolt and side airbag sensor from the body.

  1. Disconnect the connector from the side airbag sensor.