Power Door Lock Control System Data List / Active Test

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

  1. READ DATA LIST

  1. PERFORM ACTIVE TEST

Power Door Lock Control System -- Data List / Active Test



READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator, and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Enter the following menus: DIAGNOSIS / DATA LIST.

  4. Read the DATA LIST according to the display on the tester.

    Main Body:
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    D Door Courtesy SW
    		Driver side door courtesy light switch signal/ON or OFF
    		ON: Driver side door is CLOSED
    OFF: Driver side door is OPEN
    		-
    P Door Courtesy SW
    		Passenger side door courtesy light switch signal/ON or OFF
    		ON: Passenger side door is CLOSED
    OFF: Passenger side door is OPEN
    		-
    RR Door Courtesy SW
    		Rear right door courtesy light switch signal/ON or OFF
    		ON: Rear right door is CLOSED
    OFF: Rear right door is OPEN
    		-
    RL Door Courtesy SW
    		Rear left door courtesy light switch signal/ON or OFF
    		ON: Rear left door is CLOSED
    OFF: Rear left door is OPEN
    		-
    D-Door Lock Pos SW
    		Driver side door lock position switch signal/ON or OFF
    		ON: Driver side door is unlocked
    ON: Driver side door is locked
    		-
    P-Door Lock Pos SW
    		Front passenger side door and rear door's lock position switch signal/ON or OFF
    		ON: Front passenger side door or rear door is unlocked
    ON: Front passenger side door or rear door is locked
    		-
    Luggage Courtesy SW
    		Luggage compartment door courtesy light switch signal/ON or OFF
    		ON: Luggage compartment door is OPEN
    OFF: Luggage compartment door is CLOSED
    		-
    Door Lock SW-Lock
    		Door control switch lock signal/ON or OFF
    		ON: Door control switch is pushed to lock position
    OFF: Door control switch is not pushed to lock position
    		-
    Door Lock SW-Unlock
    		Door control switch unlock signal/ON or OFF
    		ON: Door control switch is pushed to unlock position
    OFF: Door control switch is not pushed to unlock position
    		-
    Door Key SW-Lock
    		Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF
    		ON: Driver side door key cylinder is turned to lock position
    OFF: Driver side door key cylinder is turned to unlock position
    		-
    Door Key SW-Unlock
    		Driver door lock/unlock switch unlock signal (key- linked unlock switch)/ON or OFF
    		ON: Driver side door key cylinder is turned to unlock position
    OFF: Driver side door key cylinder is turned to lock position
    		-
    Trunk Lock/Unlock SW
    		Luggage compartment door key cylinder switch/ON or OFF
    		ON: Ignition key is inserted and turned to lock position
    OFF: Ignition key is inserted and turned to unlock position
    		-


PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSVs, actuators, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Enter the following menus: DIAGNOSIS / ACTIVE TEST.

  4. Perform the ACTIVE TEST according to the display on the tester.

    Main Body:
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Door Lock
    		Operate door lock motor
    		LOCK/UNLOCK
    		-
    Trunk and Back-Door Open
    		Operate luggage compartment door lock motor LOCK
    		-/LOCK
    		-