Air Conditioning System Check Mode Procedure

Heater & Air Conditioning System. Camry. Acv40 Gsv40
Air Conditioning. Camry. Acv40 Gsv40

  1. LIST OF OPERATION METHODS

  1. INDICATOR CHECK

  1. DTC CHECK (SENSOR CHECK)

  1. ACTUATOR CHECK

Air Conditioning System -- Check Mode Procedure



LIST OF OPERATION METHODS


  1. By operating each of the A/C control switches as shown in the diagram below, it is possible to enter the diagnostic check mode.


    Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure


INDICATOR CHECK

  1. Turn the ignition switch to the LOCK position.

  2. Turn the ignition switch to the ACC and wait at least 5 seconds.



    3. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  3. Turn the ignition switch to the ON position while pressing the A/C control "AUTO" switch and "R/F" switch simultaneously. Hold both switches until the indicator check screen appears.



    4. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  4. The indicator check is automatically performed when panel diagnosis is activated. Check that the indicators light up and go off at 1 second intervals 4 times in succession.

    HINT:
    1. The sensor check automatically starts when the indicator check is completed.
    2. Press the "OFF" switch to cancel the check mode.
    3. If a navigation system is installed, the indicator will blink and the buzzer will sound.

DTC CHECK (SENSOR CHECK)

  1. Start the engine and warm it up.

  2. Perform the indicator check.

    HINT:
    After the indicator check is completed, the system enters the DTC check mode automatically.


    3. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  3. Read the code displayed on the panel.

    NOTICE:
    1. In the sensor check mode, which is automatically transferred from the indicator check mode, troubleshooting may be partially performed. Be sure to perform the actuator check, and then the sensor check again.
    2. If the check is performed in a dark place, DTC 21 or 24 may be displayed even though the system is normal.
    HINT:
    Refer to the DTC chart (Diagnostic Trouble Code chart) for details of the codes (Link).
    1. When there are no problems, DTC 00 is output.
    2. As an example, the illustration shows that display code 21 is output.


    4. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  4. If the steps are difficult to read because they change automatically, push the "MODE" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "MODE" switch is pushed.

    1. Push the "OFF" switch to finish panel diagnosis.
    2. Push the "R/F" switch to enter the actuator check mode.

ACTUATOR CHECK

  1. Start the engine and warm it up.

  2. Perform the indicator check.



    3. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  3. Push the "R/F" switch to perform the actuator check.

    HINT:
    Be sure to perform the actuator check after starting the engine.


    4. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  4. As the actuator check is repeated from steps 1 to 10 at 1 second intervals, check the temperature and air flow visually and by hand.

    HINT:
    1. The display blinks at 1 second intervals in the step operation.
    2. Push the "OFF" switch to finish panel diagnosis.
    3. Push the "AUTO" switch to enter the sensor check mode.

    Step No.
    		Display Code
    		Conditions
    Blower Level
    		Air Mix Damper
    		Airflow Vent
    		Air Inlet Damper
    		Compressor
    1
    		0
    		0
    		0% open
    		FACE
    		FRESH
    		OFF
    2
    		1
    		1
    		0% open
    		FACE
    		FRESH
    		OFF
    3
    		2
    		17
    		0% open
    		FACE
    		RECIRCULATION / FRESH
    		ON
    4
    		3
    		17
    		0% open
    		FACE
    		RECIRCULATION
    		ON
    5
    		4
    		17
    		50% open
    		B/L
    		RECIRCULATION
    		ON
    6
    		5
    		17
    		50% open
    		B/L
    		RECIRCULATION
    		ON
    7
    		6
    		17
    		50% open
    		FOOT
    		FRESH
    		ON
    8
    		7
    		17
    		100% open
    		FOOT-0
    		FRESH
    		ON
    9
    		8
    		17
    		100% open
    		F/D
    		FRESH
    		ON
    10
    		9
    		31
    		100% open
    		DEF
    		FRESH
    		ON


    5. Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Air Conditioning System Check Mode Procedure

  5. If the steps are difficult to read because they change automatically, push the "MODE" switch to display the steps one at a time so that they can be read easily. The items are displayed step by step each time the "MODE" switch is pushed.

    HINT:
    1. Push the "OFF" switch to finish panel diagnosis.
    2. Push the "R/F" switch to enter the sensor check mode.