Navigation System Display Does Not Dim When Light Control Switch Is Turned On

Body Electrical. Camry. Acv40 Gsv40
Navigation. Camry. Acv40 Gsv40

INSPECTION PROCEDURE

CHECK IMAGE QUALITY SETTING

CHECK VEHICLE SIGNAL (OPERATION CHECK)

NAVIGATION SYSTEM - Display does not Dim when Light Control Switch is Turned ON


INSPECTION PROCEDURE

1.CHECK IMAGE QUALITY SETTING


    Camry. Acv40 Gsv40

  1. Enter the display adjustment screen by pressing the "DISP" switch.

  1. Turn the light control switch to the tail position.

  1. Check if "Day Mode" on the display adjustment is ON.

    OK:
    "Day Mode" is on.


NG
Go to step 2
OK

TURN "Day Mode" SETTING OFF

2.CHECK VEHICLE SIGNAL (OPERATION CHECK)


    Camry. Acv40 Gsv40

  1. Enter the "Vehicle Signal Check Mode" (Check Vehicle Signal) (CAMRY_ACV40 RM000003SKF042X.html).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    		Display
    tail or on
    		ON
    off
    		OFF
    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (CAMRY_ACV40 RM0000011BR09ZX.html)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (CAMRY_ACV40 RM0000026K700ZX.html)