Speed Sensor -- Installation |
| 1. INSTALL SPEED SENSOR (NC SENSOR) |
Coat a new O-ring with ATF WS and install it to the speed sensor.
Install the speed sensor with the bolt.
- Torque:
- 8.8 N*m{90 kgf*cm, 78 in.*lbf}
 |
Connect the speed sensor connector.
| 2. INSTALL SPEED SENSOR (NT SENSOR) |
Coat a new O-ring with ATF WS and install it to the speed sensor.
Install the speed sensor with the bolt.
- Torque:
- 8.8 N*m{90 kgf*cm, 78 in.*lbf}
 |
Connect the speed sensor connector.
| 3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY |
Install the air cleaner case with the 3 bolts.
- Torque:
- 5.0 N*m{51 kgf*cm, 44 in.*lbf}
 |
Connect the hose clamp.
| 4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY |
Install the air cleaner filter element onto the air cleaner case.
Insert the hinges. Install the air cleaner cap sub-assembly with the 2 bolts.
 |
Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.
- NOTICE:
- Make sure that the hose clamp is at the correct angle.
 |
Connect the No. 2 ventilation hose to the air cleaner hose.
 |
Connect the purge line hose to the clamp (*1).
 |
Connect the 2 purge VSV vacuum hoses (*2).
Connect the purge VSV connector (*3).
Connect the mass air flow meter connector (*4).
| 5. INSTALL AIR CLEANER INLET ASSEMBLY |
Install the air cleaner inlet with the 2 bolts.
- Torque:
- 5.0 N*m{51 kgf*cm, 44 in.*lbf}
 |
| 6. INSTALL BATTERY |
Install the battery and battery tray.
Install the battery clamp with the bolt and nut.
- Torque:
- Bolt:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
- Nut:
- 3.5 N*m{36 kgf*cm, 31 in.*lbf}
 |
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 6.9 N*m{70 kgf*cm, 61 in.*lbf}