Brake. Camry. Acv40 Gsv40
Brake Control. Camry. Acv40 Gsv40
Anti-Lock Brake System -- Problem Symptoms Table |
If a normal code is displayed during the DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting page.
- NOTICE:
- When replacing the skid control ECU, sensor, etc., turn the ignition switch off.
- HINT:
- Inspect the fuses and relays before investigating the suspected areas as shown in the table below.
- Inspect each malfunction circuit in numerical order for the corresponding symptoms.
| Symptom | Suspected Area | See page |
| ABS does not operate | 1. Check the DTC reconfirming that the normal system code is output | CAMRY_ACV40 RM000001JB8003X.html |
| 2. IG power source circuit | CAMRY_ACV40 RM000001JD2003X.html | |
| 3. Front speed sensor circuit | CAMRY_ACV40 RM000001JBG003X.html | |
| 4. Rear speed sensor circuit | CAMRY_ACV40 RM000001JDB003X.html | |
| 5. Check the brake actuator assembly with the intelligent tester (Check brake actuator assembly operation using the active test function) If abnormal, check the hydraulic circuit for leakage | CAMRY_ACV40 RM0000013P9008X.html | |
| 6. If the symptoms still occur even after the above circuits in suspected areas have been inspected and proved to be normal, replace the brake actuator assembly (skid control ECU) | CAMRY_ACV40 RM0000013P6007X.html | |
| ABS does not operate efficiently | 1. Check the DTC reconfirming that the normal system code is output | CAMRY_ACV40 RM000001JB8003X.html |
| 2. Front speed sensor circuit | CAMRY_ACV40 RM000001JBG003X.html | |
| 3. Rear speed sensor circuit | CAMRY_ACV40 RM000001JDB003X.html | |
| 4. Stop light switch circuit | CAMRY_ACV40 RM0000023CJ001X.html | |
| 5. Check the brake actuator assembly with the intelligent tester (Check brake actuator assembly operation using the active test function) | CAMRY_ACV40 RM0000013P9008X.html | |
| 6. If the symptoms still occur even after the above circuits in suspected areas have been inspected and proved to be normal, replace the brake actuator assembly (skid control ECU) | CAMRY_ACV40 RM0000013P6007X.html | |
| ABS warning light malfunction (Remains on) | 1. ABS warning light circuit | CAMRY_ACV40 RM000001JD3004X.html |
| 2. Brake actuator assembly (skid control ECU) | CAMRY_ACV40 RM0000013P6007X.html | |
| ABS warning light malfunction (Does not come on) | 1. ABS warning light circuit | CAMRY_ACV40 RM000001JD4004X.html |
| Brake warning light malfunction (Remains on) | 1. Brake warning light circuit | CAMRY_ACV40 RM000001JD8003X.html |
| 2. Brake actuator assembly (skid control ECU) | CAMRY_ACV40 RM0000013P6007X.html | |
| Brake warning light malfunction (Does not come on) | 1. Brake warning light circuit | CAMRY_ACV40 RM000001JDC003X.html |
| 2. Brake actuator assembly | CAMRY_ACV40 RM0000013P6007X.html | |
| ABS sensor DTC check cannot be done | 1. Check the DTC reconfirming that the normal system code is output | CAMRY_ACV40 RM000001JB8003X.html |
| 2. TS and CG terminal circuit | CAMRY_ACV40 RM000000XIV00JX.html | |
| 3. TC and CG terminal circuit | CAMRY_ACV40 RM000000XQU003X.html | |
| 4. If the symptoms still occur even after the above circuits in suspected areas have been inspected and proved to be normal, replace the brake actuator assembly (skid control ECU) | CAMRY_ACV40 RM0000013P6007X.html |