ВЫПУСКНОЙ КОЛЛЕКТОР - СНЯТИЕ

1. REMOVE FRONT FENDER APRON SEAL RH

Освободите 4 фиксаторов и снимите уплотнение фартука крыла.

2. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

Освободите 5 фиксаторов и снимите уплотнение фартука крыла.

3. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

Disconnect the sensor connector.

Detach the wire harness clamp.

Loosen the hose clamp and remove the resonator with air cleaner cap.

Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

4. REMOVE INTAKE PIPE

Loosen the hose clamp and remove the 2 bolts and intake pipe.

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Remove the bolt from the clamp.

Remove the 2 bolts and No. 1 exhaust pipe support bracket.

Remove the 3 nuts and front exhaust pipe.

Remove the gasket.

6. REMOVE ENGINE OIL LEVEL DIPSTICK

Remove the oil level dipstick.

7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

Remove the 2 bolts, guide and O-ring.

8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Remove the 3 bolts and insulator.

9. REMOVE EXHAUST MANIFOLD

Remove the 2 nuts, 6 bolts and manifold.

Remove the gasket.