ВЫХОДНОЙ ВАЛ - ПОВТОРНАЯ СБОРКА

Coat the needle roller bearing with gear oil and install it to the output shaft.

Coat the 3rd gear with gear oil and install it to the output shaft.

Coat the No. 1 synchronizer ring with gear oil and install it to the 3rd gear.

Coat the hub sleeve with gear oil and install it to the clutch hub.

Text in Illustration

Front

• ПРИМЕЧАНИЕ:

• Be sure to install the hub sleeve to the clutch hub in the correct direction.

Install the 3 synchromesh shifting keys to the clutch hub with the 2 synchromesh shifting key springs.

• ПРИМЕЧАНИЕ:

• Do not set both openings of the shifting key springs in the same position.

Using SST and a press, install the No. 2 clutch hub to the output shaft.

• SST
• 09316-60011(09316-00021)

Select a clutch hub shaft snap ring that will allow minimal axial play.

• Standard clearance:
• 0.10 mm (0.00394 in.) or less

• Standard Clutch Hub Shaft Snap Ring:

• Mark	Thickness
  C-1	1.75 to 1.80 mm (0.0689 to 0.0709 in.)
  D	1.80 to 1.85 mm (0.0709 to 0.0728 in.)
  D-1	1.85 to 1.90 mm (0.0728 to 0.0748 in.)
  E	1.90 to 1.95 mm (0.0748 to 0.0768 in.)
  E-1	1.95 to 2.00 mm (0.0768 to 0.0787 in.)
  F	2.00 to 2.05 mm (0.0787 to 0.0807 in.)
  F-1	2.05 to 2.10 mm (0.0807 to 0.0827 in.)

Using a snap ring expander, install the snap ring.

Using a feeler gauge, measure the thrust clearance.

• Standard clearance:
• 0.10 to 0.25 mm (0.00394 to 0.00984 in.)

Coat the needle roller bearing with gear oil and install it to the output shaft.

Coat the 2nd gear with gear oil and install it to the output shaft.

Coat the No. 2 synchronizer ring with gear oil and install it to the 2nd gear.

Coat the reverse gear with gear oil and install it to the clutch hub.

Text in Illustration

Front

• ПРИМЕЧАНИЕ:

• Be sure to install the reverse gear to the clutch hub in the correct direction.

Install the 3 synchromesh shifting keys to the clutch hub with the 2 synchromesh shifting key springs.

• ПРИМЕЧАНИЕ:

• Do not set both openings of the shifting key springs in the same position.

Using SST and a press, install the clutch hub to the output shaft.

• SST
• 09316-60011

Coat the synchronizer ring with gear oil and install it to the No. 1 clutch hub.

Coat the lock ball with gear oil and install it to the output shaft.

Coat the needle roller bearing with gear oil.

Install the inner race and needle roller bearing to the 1st gear.

Coat the 1st gear with gear oil and install it to the output shaft.

Using SST and a press, install the center bearing to the output shaft.

• SST
• 09316-60011(09316-00021)

Using a dial indicator, measure the thrust clearance.

• Standard clearance:
• 0.10 to 0.25 mm (0.00394 to 0.00984 in.)

Using SST and a press, install the 5th gear to the output shaft.

• SST
• 09316-60011(09316-00021)

Select a snap ring that will allow minimal axial play.

• Standard clearance:
• 0.10 mm (0.00394 in.) or less

• Standard Output Shaft Bearing Shaft Snap Ring:

• Mark	Thickness
  A	2.67 to 2.72 mm (0.1052 to 0.1070 in.)
  B	2.73 to 2.78 mm (0.1075 to 0.1094 in.)
  C	2.79 to 2.84 mm (0.1099 to 0.1118 in.)
  D	2.85 to 2.90 mm (0.1123 to 0.1141 in.)
  E	2.91 to 2.96 mm (0.1146 to 0.1165 in.)
  F	2.97 to 3.02 mm (0.1170 to 0.1188 in.)
  G	3.03 to 3.08 mm (0.1193 to 0.1212 in.)
  H	3.09 to 3.14 mm (0.1217 to 0.1236 in.)
  J	3.15 to 3.20 mm (0.1241 to 0.1259 in.)
  K	3.21 to 3.26 mm (0.1264 to 0.1283 in.)
  L	3.27 to 3.32 mm (0.1288 to 0.1307 in.)

Using a brass bar and hammer, tap on the snap ring.

Using a dial indicator, measure the thrust clearance.

• Standard clearance:
• 0.10 to 0.30 mm (0.00394 to 0.0118 in.)

Using a feeler gauge, measure the thrust clearance.

• Standard clearance:
• 0.10 to 0.25 mm (0.00394 to 0.00984 in.)

Using a dial indicator, measure the thrust clearance.

• Standard clearance:
• 0.10 to 0.25 mm (0.00394 to 0.00984 in.)

Using a dial indicator, measure the thrust clearance.

• Standard clearance:
• 0.10 to 0.25 mm (0.00394 to 0.00984 in.)

Using a dial indicator, measure the radial clearance.

• Standard clearance:
• 0.008 to 0.034 mm (0.000315 to 0.00133 in.)

Using a dial indicator, measure the radial clearance.

• Standard clearance:
• 0.008 to 0.034 mm (0.000315 to 0.00133 in.)

Using a dial indicator, measure the radial clearance.

• Standard clearance:
• 0.009 to 0.056 mm (0.000355 to 0.00220 in.)