УЗЕЛ ТОПЛИВНОГО БАКА - УСТАНОВКА

Install the fuel tank breather hose to the fuel sub tank.

Install the fuel tank to filler pipe hose to the fuel sub tank.

Install a new gasket and fuel tank vent tube with the 8 screws.

• Момент затяжки:
• 4.0 N*m{ 41 kgf*cm, 35 in.*lbf}

Attach the wire harness clamp.

Set the fuel sub tank on a transmission jack and lift up the transmission jack.

Connect the 2 fuel tank bands with the 4 bolts.

• Момент затяжки:
• 40 N*m{ 408 kgf*cm, 30 ft.*lbf}

Connect the fuel sender gauge connector.

Connect the fuel tank breather hose to the filler pipe.

Connect the fuel tank to filler pipe hose to the filler pipe.

Connect the fuel evaporation hose, fuel breather hose and 2 fuel hoses.

Install the No. 2 fuel tank protector with the 5 bolts.

• Момент затяжки:
• 20 N*m{ 204 kgf*cm, 15 ft.*lbf}

Using the hand pump mounted on the fuel filter cap, bleed the air from the fuel system. Continue pumping until the pump resistance increases.

Check that there are no fuel leaks anywhere in the fuel system after performing maintenance.

• УКАЗАНИЕ:

• When checking for fuel leaks, make sure that there is pressure in the fuel line.