Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - ТОПЛИВНАЯ СИСТЕМА ДВИГАТЕЛЯ 5L-E
REMOVE TIMING BELT
REMOVE DIESEL THROTTLE BODY
REMOVE INJECTION PIPE SET
REMOVE INJECTION PUMP DRIVE PULLEY
REMOVE INJECTION PUMP ASSEMBLY
ТОПЛИВНЫЙ НАСОС ВЫСОКОГО ДАВЛЕНИЯ - СНЯТИЕ
| 1. REMOVE TIMING BELT |
Remove the timing belt (See page ).
| 2. REMOVE DIESEL THROTTLE BODY |
Remove the diesel throttle body (See page ).
| 3. REMOVE INJECTION PIPE SET |
Using a union nut wrench, loosen the 8 union nuts of the 4 injection pipes.
| *1 | Union Nut Wrench |
| *a | for Injection Nozzle Side |
| *b | for Injection Pump Side |
Remove the 2 nuts, 2 upper pipe clamps and 4 injection pipes with 2 lower pipe clamps.
| 4. REMOVE INJECTION PUMP DRIVE PULLEY |
Using SST, remove the pulley nut.
- SST
- 09213-14010(91651-60865)
09330-00021
Using SST, remove the drive pulley.
- SST
- 09950-50013(09951-05010,09952-05010,09953-05010,09954-05021)
| 5. REMOVE INJECTION PUMP ASSEMBLY |
Disconnect the 5 connectors and detach the wire harness clamp.
Disconnect the 3 fuel hoses.
Remove the 3 bolts and injection pump stay.
Remove the 2 nuts and injection pump.