Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - СИСТЕМА ЗАПУСКА ДВИГАТЕЛЯ 5L-E
INSTALL STARTER ASSEMBLY
CONNECT CLUTCH FLEXIBLE HOSE BRACKET
CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY
INSTALL REAR ENGINE UNDER COVER ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
СТАРТЕР - УСТАНОВКА
| 1. INSTALL STARTER ASSEMBLY |
Install the starter with the 2 bolts and nut.
- Момент затяжки:
- 68 N*m{ 693 kgf*cm, 50 ft.*lbf}
Connect the starter wire with the nut.
- Момент затяжки:
- 9.8 N*m{ 100 kgf*cm, 87 in.*lbf}
Install the terminal cap.
Connect the starter connector.
| 2. CONNECT CLUTCH FLEXIBLE HOSE BRACKET |
Connect the clutch flexible hose bracket with the bolt.
- Момент затяжки:
- 72 N*m{ 730 kgf*cm, 53 ft.*lbf}
| 3. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
Connect the release cylinder with the 2 bolts.
- Момент затяжки:
- 12 N*m{ 120 kgf*cm, 9 ft.*lbf}
| 4. INSTALL REAR ENGINE UNDER COVER ASSEMBLY |
Install the rear engine under cover with the 4 bolts.
- Момент затяжки:
- 29 N*m{ 296 kgf*cm, 21 ft.*lbf}
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- ПРИМЕЧАНИЕ:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).