Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - СИСТЕМА ЗАПУСКА ДВИГАТЕЛЯ 5L-E
REMOVE STARTER YOKE ASSEMBLY
REMOVE MAGNET STARTER SWITCH ASSEMBLY
REMOVE STARTER BRUSH HOLDER ASSEMBLY
REMOVE STARTER ARMATURE ASSEMBLY
СТАРТЕР - РАЗБОРКА
1. REMOVE STARTER YOKE ASSEMBLY |
Remove the screw and terminal 50 wire.
Remove the nut and disconnect the terminal C wire.
*1 | Terminal C |
Remove the 2 through bolts and O-rings and pull out the starter yoke with the armature.
2. REMOVE MAGNET STARTER SWITCH ASSEMBLY |
Remove the 2 screws and magnet starter switch.
Remove the return spring.
Remove the starter clutch, starter armature pinion, starter idle pinion, retainer and clutch roller from the starter drive housing.
*1 | Starter Clutch |
*2 | Starter Armature Pinion |
*3 | Starter Idle Pinion |
*4 | Retainer |
*5 | Clutch Roller |
Using a magnet hand, remove the steel ball from the clutch shaft hole.
*1 | Magnet Hand |
3. REMOVE STARTER BRUSH HOLDER ASSEMBLY |
Disconnect the 4 brushes from the starter brush holder.
Using a screwdriver, hold back the brush spring.
Disconnect the brush from the starter brush holder.
Remove the starter brush holder.
4. REMOVE STARTER ARMATURE ASSEMBLY |
Using a plastic-faced hammer, tap the end of the starter yoke and remove the starter armature.