ПРИВОДНОЙ РЕМЕНЬ - СНЯТИЕ

1. REMOVE FRONT BUMPER COVER LOWER

Remove the clip, 5 bolts and front bumper cover lower.

2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Remove the 4 bolts.

Unhook the engine under cover from the vehicle body as shown in the illustration.

3. REMOVE FRONT FENDER APRON SEAL RH

Remove the 4 clips and fender apron seal.

4. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

Disconnect the sensor connector.

Detach the wire harness clamp.

Loosen the hose clamp and remove the resonator with air cleaner cap.

Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

6. REMOVE AIR CLEANER CASE ASSEMBLY

Remove the 3 bolts and air cleaner case.

7. REMOVE VANE PUMP V BELT

Loosen bolt and nut, and remove the V belt.

8. REMOVE COOLER COMPRESSOR V BELT

Loosen nut and adjusting bolt, and remove the V belt.

Text in Illustration
*1	Adjusting Bolt

9. REMOVE FAN AND GENERATOR V BELT

Loosen 2 bolts.

Loosen adjusting bolt, and remove the V belt.

Text in Illustration
*1	Adjusting Bolt