БЛОК СЦЕПЛЕНИЯ (для моделей с 5L-E) - СНЯТИЕ

1. REMOVE MANUAL TRANSMISSION ASSEMBLY

Remove the manual transmission assembly (See page ).

2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

Remove the release fork and release bearing from the clutch housing.

3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY

Remove the clip and release bearing from the release fork.

4. REMOVE CLUTCH RELEASE FORK BOOT

5. REMOVE RELEASE FORK SUPPORT

Remove the release fork support from the manual transmission unit.

6. REMOVE CLUTCH COVER ASSEMBLY

Place matchmarks on the clutch cover and flywheel.

Text in Illustration
*a	Matchmark

Loosen each set bolt one turn at a time until spring tension is released.

Remove the 6 set bolts and pull off the clutch cover.

7. REMOVE CLUTCH DISC ASSEMBLY

Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.