ГЕНЕРАТОР - УСТАНОВКА

Temporarily install the generator with the 2 bolts.

Connect the vacuum pump oil outlet hose.

Install 2 new gaskets and the vacuum pump oil inlet hose with the union bolt.

• Момент затяжки:
• 14 N*m{ 140 kgf*cm, 10 ft.*lbf}

Connect the vacuum pump hose.

Attach the vacuum pump oil inlet hose to the cord clip.

Install the generator wire with the nut.

• Момент затяжки:
• 9.8 N*m{ 100 kgf*cm, 87 in.*lbf}

Install the terminal cap.

Connect the generator connector.

Temporarily install the cooler compressor with the 2 bolts.

Temporarily install the idle pulley bracket with the 4 bolts.

Tighten the 6 bolts in the sequence shown in the illustration.

• Момент затяжки:
• for bolt A:
• 45 N*m{ 459 kgf*cm, 33 ft.*lbf}
• except bolt A:
• 25 N*m{ 250 kgf*cm, 18 ft.*lbf}

Connect the wire harness with the bolt.

• Момент затяжки:
• 13 N*m{ 131 kgf*cm, 9 ft.*lbf}

Connect the cooler compressor connector.

Install the fan and generator V belt (See page ).