WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System) - CUSTOMIZE PARAMETERS

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

When the customer requests a change in a function, first make sure that the function can be customized.

Be sure to make a note of the current settings before customizing.

Connect the intelligent tester to the DLC3.

Turn the ignition switch to ON.

Turn the intelligent tester on.

Enter the following menus: Utility / Customize.

Select the setting by referring to the table below.

Wireless Door Lock
Display (item)	Default	Function	Setting
Wireless Control	ON	The function that turns the wireless door lock on or off.	ON or OFF
Hazard Answer Back	ON	When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice.	ON or OFF
Open Door Warning	ON	If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds.	ON or OFF
Auto Lock Time	30 s	The function that changes the time until relocking after unlocking the doors with the wireless door lock function.	30 s, 60 s or 120 s
Wireless Buzzer Resp	ON	This function turns the wireless door lock buzzer response on or off.	ON or OFF