Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System) - DATA LIST / ACTIVE TEST
| READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| D Door Courtesy SW | Driver side door courtesy switch signal / ON or OFF | ON: Driver side door is open OFF: Driver side door is closed | - |
| P Door Courtesy SW | Passenger side door courtesy switch signal / ON or OFF | ON: Passenger side door is open OFF: Passenger side door is closed | - |
| RL Door Courtesy SW | Rear door courtesy switch LH signal / ON or OFF | ON: Rear side door LH is open OFF: Rear side door LH is closed | - |
| RR Door Courtesy SW | Rear door courtesy switch RH signal / ON or OFF | ON: Rear side door RH is open OFF: Rear side door RH is closed | - |
| Back Door Courtesy SW | Back door courtesy switch signal / ON or OFF | ON: Back door is open OFF: Back door is closed | - |
| D Lock Pos switch | Driver side door lock position switch signal / ON or OFF | ON: Driver side door lock is unlocked OFF: Driver side door lock is locked | - |
| P Lock Pos switch | Passenger side door lock position switch signal / ON or OFF | ON: Passenger side door is unlocked OFF: Passenger side door is locked | - |
| RL Lock Pos switch | Rear door LH lock position switch signal / ON or OFF | ON: Rear side door LH is unlocked OFF: Rear side door LH is locked | - |
| RR Lock Pos switch | Rear door RH lock position switch signal / ON or OFF | ON: Rear side door RH is unlocked OFF: Rear side door RH is locked | - |
| Back Lock Pos switch | Back door lock position switch signal / ON or OFF | ON: Back door is unlocked OFF: Back door is locked | - |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Door lock status | Back door lock status signal / UNLOCK or LOCK | UNLOCK: Back door unlocked LOCK: Back door locked | - |
| Wireless PBD SW Operation | Transmitter switch operation condition signal/1 time, 2 times, 0.8 sPR or OFF | Current customize setting displayed | - |
| ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Hazard | Turn signal flasher relay | ON or OFF | - |
| Door Lock | All door lock motors | OFF or LOCK | - |
| D-Door Unlock | Driver side door unlock motor | OFF or UNLOCK | - |