Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System) - CUSTOMIZE PARAMETERS
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Hazard Answer Back | ON | When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. | ON/OFF |
| Wireless Control | ON | Function that turns the wireless door lock function ON or OFF. | ON/OFF |
| Open Door Warning*1 | ON | If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. | ON/OFF |
| Panic Alarm Function*2 | ON | Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds. | ON/OFF |
| Unlock 2 Operation | OFF | Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. | ON/OFF |
| Auto Lock Time | 30 s | Function to change the time until relocking after unlocking with the wireless door lock function. | 30 s/60 s/120 s |
| Wireless Auto Lock | ON | Function to control the automatic relocking of doors after unlocking with the wireless door lock function. | ON/OFF |
| Wireless Buzzer Resp | ON*3 | Wireless buzzer response function. | ON/OFF |
| Wireless Buzzer Volume | Level 7 | This function changes the wireless buzzer volume. | Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7 |
- HINT:
- *1: Except China
- *2: w/ Panic Switch
- *3: Except Europe and China
| Display | Default | Contents | Setting |
| Wireless PBD Operation | 0.8 s 1Motion* | Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off). Function to turn on/off the power back door wireless one motion open operation.* | 1 Oper or 2 Oper or 0.8 s or OFF 1Motion or 1 Oper or 2 Oper or 0.8 s or OFF* |
- HINT:
- *: Except Europe
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display) |
- HINT:
- The following items can be customized.
- NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Turn the engine switch on (IG).
Enter the following menus: Setup / Vehicle.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Remote 2-press unlock | OFF | Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. | ON/OFF |
| Lock/unlock feedback lights | ON | When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. | ON/OFF |
| Lock feedback volume | Level 7 | This function changes the wireless buzzer volume. | Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7 |