Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - POWER OUTLETS INT

VOLTAGE INVERTER - ON-VEHICLE INSPECTION

1. INSPECT VOLTAGE INVERTER
  • HINT:
  • Remove interior parts so that the voltage inverter can be seen.
Voltage Inverter - On-Vehicle Inspection. POWER OUTLETS INT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Disconnect the voltage inverter connector.

Measure the voltage according to the value(s) in the table below.

  • Standard Voltage:
  • Tester ConnectionSwitch ConditionSpecified Condition
    K44-5 (IG) - K44-1 (GND)Ignition switch on (IG)10 to 16 V
    K44-1 (GND) - Body groundAlwaysBelow 1 V

If the result is not as specified, repair or replace the harness or connector.

Text in Illustration
*aFront view of wire harness connector:
(to Voltage Inverter)
Voltage Inverter - On-Vehicle Inspection. POWER OUTLETS INT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Reconnect the voltage inverter connector.

Measure the voltage according to the value(s) in the table below.

  • Standard Voltage:
  • Tester ConnectionSwitch ConditionSpecified Condition
    K44-4 (AC1) - K44-8 (AC2)Ignition switch on (IG)
    Main switch on    		AC 198 to 242 V

If the result is not as specified, replace the voltage inverter.

Text in Illustration
*aComponent with harness connected:
(Voltage Inverter)
POWER OUTLETS INT
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
VOLTAGE INVERTER