Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - THEFT DETERRENT / KEYLESS ENTRY


THEFT DETERRENT SYSTEM (w/o Entry and Start System) - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
Use these procedures to troubleshoot the theft deterrent system.
*: Use the intelligent tester.
Troubleshooting of the theft deterrent system is based on the premise that the door lock control system, wireless door lock control system, lighting system, horn system and engine immobiliser system are operating normally. Check these systems first before troubleshooting the theft deterrent system.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.INSPECT BATTERY VOLTAGE
  • Standard voltage:
  • 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT
3.PROBLEM SYMPTOMS TABLE

Refer to Problem Symptoms Table ().

Result
ResultProceed to
Fault is not listed in problem symptoms tableA
Fault is listed in problem symptoms tableB
B.
Go to step 5
A
4.OVERALL ANALYSIS AND TROUBLESHOOTING*

Data List / Active Test ().

Terminals of ECU ().

Operation Check ().

Inspection.

NEXT
5.REPAIR OR REPLACE
NEXT
6.CONFIRMATION TEST
NEXT
END
THEFT DETERRENT / KEYLESS ENTRY
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
THEFT DETERRENT SYSTEM w/o Entry and Start System