Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
SEAT BELT WARNING SYSTEM - OPERATION CHECK
| INSPECT DRIVER SIDE SEAT BELT WARNING LIGHT |
Turn the ignition switch to ON.
When the driver seat belt is not fastened, check that the driver side seat belt warning light on the combination meter assembly blinks.
When the driver seat belt is fastened, check that the driver side seat belt warning light on the combination meter assembly is off.
| INSPECT FRONT PASSENGER SIDE SEAT BELT WARNING LIGHT (w/ Airbag System) |
Turn the ignition switch to ON.
When the front passenger side seat belt is not fastened with the passenger seat occupied, check that the front passenger side seat belt warning light on the multi-display assembly*1 (clock assembly*2) blinks.
When the front passenger seat belt is fastened with the front passenger seat occupied, check that the front passenger side seat belt warning light on the multi-display assembly*1 (clock assembly*2) is off.
| INSPECT SEAT BELT WARNING BUZZER (w/ Seat Belt Warning Buzzer) |
- HINT:
- If the buzzer does not sound, the buzzer cancel setting may be set to ON ().
Turn the ignition switch to ON.
Place a weight of 20 kg (44.0 lb) on the front passenger seat (w/ Airbag System).
- NOTICE:
When the vehicle is driven at approximately 20 km/h (12.5 mph) or more while the driver or front passenger seat (w/ Airbag System) belt is not fastened, check that the buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds.
Check that the buzzer sounds at an interval of 0.4 seconds for 90 seconds.
Check that the buzzer stops 2 minutes after the buzzer starts sounding.
After the buzzer has stopped, turn the ignition switch off and then start the engine again. Drive the vehicle at approximately 20 km/h (12.5 mph) or more while the driver or front passenger seat (w/ Airbag System) belt is not being fastened, and then check that the buzzer sounds again.
After the buzzer has stopped, fasten the driver and front passenger seat (w/ Airbag System) belts. Drive the vehicle at approximately 20 km/h (12.5 mph) or more and unfasten the driver or front passenger seat (w/ Airbag System) belt, and then check that the buzzer sounds again.
After the buzzer has stopped, move the shift lever to R, and then move it to D. Drive the vehicle at approximately 20 km/h (12.5 mph) or more, and then check that the buzzer sounds again.